[Nut-upsdev] Tripp Lite G1000U (0x2007)

[Arjen de Korte]

Citeren Royce Williams <royce at tycho.org>:

> Externally, the G1000U looks much like the SMART1000LCD: an amber
> LCD, jacks for coax and telephone, four protected receptacles and
> four non-protected, and a USB-only interface.  Internally, it's
> product 2007, vendor 09ae.

That combination is indeed supported through the usbhid-ups driver.

> I am running FreeBSD 6.4 with a stock kernel (and so uhid is
> enabled) and I installed the FreeBSD port of NUT (nut-2.2.2) today
> with the following options set:
>
> [ ] SERIAL  SERIAL support
> [X] USB     USB support
> [X] SNMP    SNMP support
> [X] NEON    NEON XML/HTTP support
> [ ] HAL     HAL support
> [X] IPV6    IPV6 support
> [ ] DEVEL   Install header files
> [X] CGI     Web CGI interface
>
>
> I read Charles Sprickman's helpful post 'Some FreeBSD tips':
>
> http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-March/002513.html
>
> ... but I wasn't able to figure out if uhid should be disabled or not
> for my unit.

It should for all NUT drivers using the USB interface on FreeBSD,  
except for the energizerups driver that is scheduled for removal anyway.

Best regards, Arjen
-- 
Please keep list traffic on the list