[Nut-upsdev] [PATCH] megatec_usb: add support for online yunto

[Alexander I. Gordeev]

On Mon, 09 Jun 2008 00:59:33 +0400, Axel Gembe <ago at bastart.eu.org> wrote:

> Alexander I. Gordeev wrote:
>
>> > Please send more information.
>> > Vendor name is Yunto, right?
>> >
>>
> Vendor name is Online, see here:
> http://www.online-usv.de/international/welcome.asp
>
>> > What is the exact model name?
>> >
>>
> Its the Yunto Q450, see here:
> http://www.online-usv.de/international/yuntoq.asp
>
>> > Some driver output would be interesting too.
>> >
>>
> vmhost ~ # upsc main at localhost
> battery.voltage: 13.30
> driver.name: megatec_usb
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.version: 2.3.0
> driver.version.internal: 1.5.14
> input.frequency: 49.9
> input.voltage: 229.0
> input.voltage.fault: 0.0
> input.voltage.maximum: 235.0
> input.voltage.minimum: 228.0
> output.voltage: 228.0
> ups.beeper.status: disabled
> ups.delay.shutdown: 0
> ups.delay.start: 2
> ups.load: 45.0
> ups.mfr: unknown
> ups.model: unknown
> ups.serial: unknown
> ups.status: OL TRIM
> ups.temperature: 25.0
> ups.type: standby
> vmhost ~ # lsusb
> Bus 002 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 001 Device 003: ID 06da:0002 Phoenixtec Power Co., Ltd
> Bus 001 Device 001: ID 0000:0000
>
> I've also attached the debug output of the driver, tell me if more
> information is needed.
>
>  - Axel
>

Thanks, this is quite enough :)
I'll update the driver and compatibility list.
There is a kind of conflict with bcmxcp_usb driver for the VID:PID
combination which is bad for autodetection.

-- 
  Alexander