[Nut-upsdev] liebert esp2 new version + crest factor

[Robert Jobbagy]

I attached it again.

2010/4/14 Spiros Ioannou <sivann at gmail.com>

> Hi Robert,
> I think there is a size limit on the list. Try zipping the attachment.
> Also, you can mail directly to me.
> Thanks!
> -S
>
>
> On Tue, Apr 13, 2010 at 11:25 PM, Robert Jobbagy <jobbagy.robert at gmail.com
> > wrote:
>
>> Hi Guys,
>>
>> I tested Spiros code and attached the my output, but someone rejected my
>> mail from Nut moderators.
>> Why? You didn't give the reason.
>> Pls accept it
>>
>>
>> 2010/4/13 Spiros Ioannou <sivann at gmail.com>
>>
>>> Hello,
>>> 1) I'm planning on adding lots of measurements to the driver liebert-esp2
>>> + correct support for 3-phase systems. Should I make a large patch based on
>>> the last svn head or send you the whole file? Multiple patches per change
>>> are probably not practical in this case.
>>>
>>> 2) in http://www.networkupstools.org/doc/2.2.0/new-names.html there is
>>> no crest factor variable. Crest factor is very important for large
>>> installations. Should I add a new variable named crestfactor ? (Crest factor
>>> shows the ratio between the peak and the RMS)
>>>
>>> If you have a liebert ups, please send me the output from the program I
>>> last sent you.
>>>
>>> Thanks,
>>>
>>> -Spiros
>>>
>>> _______________________________________________
>>> Nut-upsdev mailing list
>>> Nut-upsdev at lists.alioth.debian.org
>>> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
>>>
>>
>>
>>
>> --
>> Best Regards,
>>
>> Robert
>>
>
>


-- 
Best Regards,

Robert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100414/2952f733/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: liebertgxt2_1000RT230_log.tar.gz
Type: application/x-gzip
Size: 3462 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100414/2952f733/attachment.bin>