[Nut-upsdev] Syslog flooding

[Kelvin Ku]

On Mon, Apr 26, 2010 at 08:21:45PM +0200, Arjen de Korte wrote:
> Citeren Kelvin Ku <kelvin at telemetry-investments.com>:
>
>> Another UPS of the same model connected to a different host is generating the
>> same flooding. As it stands, I can't monitor any of these Tripp Lite UPSs (I
>> have four of them) because of these spontaneous disconnects. Note that I
>> hacked in support for this model as follows:
>>
>> --- nut-2.4.3/drivers/tripplite-hid.c.0 2010-03-24 10:34:10.238494000 -0400
>> +++ nut-2.4.3/drivers/tripplite-hid.c   2010-03-24 10:39:26.166498000 -0400
>
> If you post to the development mailing list, we more or less assume that 
> you're following development versions and basically checked against the 
> latest version from the trunk (*not* the latest stable version). This 
> might not the case here and I suspect that you might be hit by a problem 
> that was recently fixed:
>
>     http://boxster.ghz.cc/projects/nut/changeset/2407
>
> Please checkout the latest version from the trunk, which will have this 
> patch included. You only need to apply the patch to 'tripplite-hid.c'. 
> The remainder of the changes will be done automatically when you run 
> 'make dist' after './configure'.

Just to be clear, the relevant patch is for drivers/libhid.c, not
drivers/tripplite-hid.c, right?

I applied the patch for libhid.c. Let's see how it goes.

Thanks,
Kelvin