[Nut-upsdev] Syslog flooding

[Arjen de Korte]

Citeren Kelvin Ku <kelvin op telemetry-investments.com>:

> Another UPS of the same model connected to a different host is generating the
> same flooding. As it stands, I can't monitor any of these Tripp Lite UPSs (I
> have four of them) because of these spontaneous disconnects. Note that I
> hacked in support for this model as follows:
>
> --- nut-2.4.3/drivers/tripplite-hid.c.0 2010-03-24 10:34:10.238494000 -0400
> +++ nut-2.4.3/drivers/tripplite-hid.c   2010-03-24 10:39:26.166498000 -0400

If you post to the development mailing list, we more or less assume  
that you're following development versions and basically checked  
against the latest version from the trunk (*not* the latest stable  
version). This might not the case here and I suspect that you might be  
hit by a problem that was recently fixed:

     http://boxster.ghz.cc/projects/nut/changeset/2407

Please checkout the latest version from the trunk, which will have  
this patch included. You only need to apply the patch to  
'tripplite-hid.c'. The remainder of the changes will be done  
automatically when you run 'make dist' after './configure'.

Best regards, Arjen
-- 
Please keep list traffic on the list