[Nut-upsdev] PowerCOM - HID PDC status

[Arjen de Korte]

Citeren Morozov Alexey <morozov op pcm.ru>:

> Thank you for adding sound management command. It very important thing
> for end user. I'm not sure that CPU firmware of sample support this
> command. Please let me know serial number of BNT-500AP which you have on
> hand. We'll check and send updated USB controller chip or whole board
> with new CPU version directly from factory.

The present version does *not* support silencing the beeper (that's  
why I removed this in r2213). The USB controller is socketed in the  
UPS, so if you just send a new one, that would be enough. The  
following is the relevant info from 'lsusb -v':

   idVendor           0x0d9f Powercom Co., Ltd
   idProduct          0x00a6
   bcdDevice            0.01
   iManufacturer           3 POWERCOM Co.,LTD
   iProduct                1   UPS  BNT--500AP FW7.A6
   iSerial                 2 0A6-0000-0001

Best regards, Arjen
-- 
Please keep list traffic on the list