[Nut-upsdev] Syslog flooding

[Charles Lepple]

On Mon, Apr 26, 2010 at 3:11 PM, Kelvin Ku
<kelvin at telemetry-investments.com> wrote:
> On Mon, Apr 26, 2010 at 08:21:45PM +0200, Arjen de Korte wrote:
>> Citeren Kelvin Ku <kelvin at telemetry-investments.com>:
>>
>>> Another UPS of the same model connected to a different host is generating the
>>> same flooding. As it stands, I can't monitor any of these Tripp Lite UPSs (I
>>> have four of them) because of these spontaneous disconnects. Note that I
>>> hacked in support for this model as follows:
>>>
>>> --- nut-2.4.3/drivers/tripplite-hid.c.0 2010-03-24 10:34:10.238494000 -0400
>>> +++ nut-2.4.3/drivers/tripplite-hid.c   2010-03-24 10:39:26.166498000 -0400
>>
>> If you post to the development mailing list, we more or less assume that
>> you're following development versions and basically checked against the
>> latest version from the trunk (*not* the latest stable version). This
>> might not the case here and I suspect that you might be hit by a problem
>> that was recently fixed:
>>
>>     http://boxster.ghz.cc/projects/nut/changeset/2407
>>
>> Please checkout the latest version from the trunk, which will have this
>> patch included. You only need to apply the patch to 'tripplite-hid.c'.
>> The remainder of the changes will be done automatically when you run
>> 'make dist' after './configure'.
>
> Just to be clear, the relevant patch is for drivers/libhid.c, not
> drivers/tripplite-hid.c, right?
>
> I applied the patch for libhid.c. Let's see how it goes.

What was the status of applying the change from r2407 (linked above)?

Also, what kernel and distribution are you using?

thanks,

-- 
- Charles Lepple