[Nut-upsdev] ORVALDI 650/750/900SP.

[Paweł Sikora]

On Monday 25 October 2010 22:19:44 Arjen de Korte wrote:

> First thing for you to try is if the blazer_usb driver is able to  
> communicate with your UPS.

thank you very much for all hints. i've read manuals, setup configs
with blazer_usb driver and tested hardware today's morning.

generally, it works in 99%...

quering works:

# upsc orvaldi
battery.voltage: 13.50
battery.voltage.nominal: 12.0
beeper.status: enabled
device.mfr:
device.model:
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: port_config_value_is_unused_in_usb_drivers
driver.version: 2.4.3
driver.version.internal: 0.03
input.current.nominal: 3.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 238.0
input.voltage.fault: 238.0
input.voltage.nominal: 230
output.voltage: 238.0
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: V1.13APO-E
ups.load: 31
ups.mfr:
ups.model:
ups.productid: 5161
ups.status: OL
ups.temperature: 45.0
ups.type: offline / line interactive
ups.vendorid: 0665

closing system on low-battery works:

Oct 26 07:37:55 localhost blazer_usb[3188]: Startup successful
Oct 26 07:37:55 localhost upsd[3195]: listening on 127.0.0.1 port 3493
Oct 26 07:37:55 localhost upsd[3195]: listening on ::1 port 3493
Oct 26 07:37:55 localhost upsd[3195]: Connected to UPS [orvaldi]: blazer_usb-orvaldi
Oct 26 07:37:55 localhost upsd[3196]: Startup successful
Oct 26 07:37:59 localhost upsmon[3155]: Poll UPS [orvaldi at localhost] failed - Write error: Broken pipe
Oct 26 07:37:59 localhost upsmon[3155]: Communications with UPS orvaldi at localhost lost
Oct 26 07:38:00 localhost upsmon[3155]: Signal 15: exiting
Oct 26 07:38:00 localhost upsmon[3154]: upsmon parent: read
Oct 26 07:38:00 localhost upsmon[3228]: Startup successful
Oct 26 07:38:00 localhost upsd[3196]: User upsmon at 127.0.0.1 logged into UPS [orvaldi]
Oct 26 07:40:00 localhost upsmon[3229]: UPS orvaldi at localhost on battery
Oct 26 07:40:24 localhost blazer_usb[3188]: Communications with UPS lost: status read failed!
Oct 26 07:40:26 localhost blazer_usb[3188]: Communications with UPS re-established
Oct 26 07:41:42 localhost blazer_usb[3188]: Communications with UPS lost: status read failed!
Oct 26 07:41:44 localhost blazer_usb[3188]: Communications with UPS re-established

(...)
       but has some communications problems...
(...)

Oct 26 07:55:08 localhost blazer_usb[3188]: Communications with UPS lost: status read failed!
Oct 26 07:55:10 localhost blazer_usb[3188]: Communications with UPS re-established
Oct 26 07:55:15 localhost upsmon[3229]: UPS orvaldi at localhost battery is low
Oct 26 07:55:15 localhost upsd[3196]: Client upsmon at 127.0.0.1 set FSD on UPS [orvaldi]
Oct 26 07:55:15 localhost upsmon[3229]: Executing automatic power-fail shutdown
Oct 26 07:55:15 localhost upsmon[3229]: Auto logout and shutdown proceeding
Oct 26 07:55:20 localhost init: Switching to runlevel: 0

and finally, during idle daytime it crashes silently twice:

[14133.306369] blazer_usb[2349]: segfault at 0 ip 0000000000402a8c sp 00007fff6b833f80 error 4 in blazer_usb[400000+10000]
[21514.196361] blazer_usb[18593]: segfault at 0 ip 0000000000402a8c sp 00007fff552a90b0 error 4 in blazer_usb[400000+10000]