[Nut-upsdev] HP T1500 INTL

[James Harper]

I have a HP T1500 INTL that isn't picked up under 2.4.3. I added the USB
device ID to tripplite-hid.c like:

        /* HP T1500 INTL */
        { USB_DEVICE(HP_VENDORID, 0x1f09), battery_scale_1dot0 },

and it seems to work just fine:

# upsc UPS1 at localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 30
battery.temperature: 23.9
battery.type:
battery.voltage: 40.9
battery.voltage.nominal: 36.0
device.mfr: Hewlett Packard
device.model: T1500 INTL
device.serial: <redacted>
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: UPS1
driver.version: 2.4.3
driver.version.data: TrippLite HID 0.4
driver.version.internal: 0.34
input.frequency: 50.0
input.transfer.high: 278.0
input.transfer.low: 182.0
input.voltage: 248.1
input.voltage.nominal: 230
output.frequency: 50.0
output.frequency.nominal: 50
output.voltage: 218.0
output.voltage.nominal: 230
ups.beeper.status: muted
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 10
ups.mfr: Hewlett Packard
ups.model: T1500 INTL
ups.power.nominal: 1500
ups.productid: 1f09
ups.serial: <redacted>
ups.status: OL TRIM
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.timer.start: -1
ups.vendorid: 03f0
ups.watchdog.status: 0 

please consider including it in future versions.

Thanks

James