[Nut-upsdev] APC MeasureUPS support

[Ben Kamen]

I sent this to the NUT users list and no response so I thought I'd send it here next..

It's a pretty easy issue really:

> Hey all,
>
>  I have a measure-UPS card and the external cabled module.
>
> They're supposed to operate the same... does NUT auto detect them when using the apcsmart driver or are there config parms required?
>
> The the smart-slot unit is hooked to an SNMP/WEB card (and works through SNMP which isn't a fair compare) -- so I can't really test compare the two right now -- but I thought I'd ask before I go through all the tinkering.

And then in an update email after I did a little more poking:

> As a quick update, the 't' and 'h' commands work via serial terminal returning local temp/humidity for the cabled module just like they do for the SmartSlot card.
>
> So the question is "how to enable".

Any suggestions?

Thanks,

  -Ben

-- 
Ben Kamen - O.D.T., S.P.
----------------------------------------------------------------------
eMail: ben at benjammin.net                      http://www.benjammin.net
Fortune says:
	"Beauty is transitory."
	"Beauty survives."
		-- Spock and Kirk, "That Which Survives", stardate unknown
-                                                              -
NOTICE: All legal disclaimers sent to benjammin.net/benkamen.net
or any of it's affiliated domains are rendered null and void on
receipt of communications and will be handled/considered as such.