[Nut-upsdev] [blazer_usb] Support for TECNOWARE ERA LCD (FGCERALCD0K85)

flavio gigafrav at gmail.com
Sat Jan 26 09:08:14 UTC 2013

I have uninstalled Upsilon2000, installed WinNUT (with ups connected) and
do a sniff during installation :


tell me if it's enougth or I have to do some more specific configuration ;)

2013/1/24 Rob Power <robpwr at gmail.com>

> No hints about ulz format actually.
> Hopefully Flavio may help giving a new sniff using Windows version of NUT;
> I would like, too, but I phisically can't.
> 2013/1/15 Charles Lepple <clepple at gmail.com>
>> On Jan 13, 2013, at 3:29 PM, Rob Power wrote:
>> > On the other side, string langid descriptor (line 0052) seems to be
>> empty, is that possible?
>> This might just be the way that the HTML shows it. Does USBlyzer have any
>> documentation on the .ulz file format? (The data from the USB SETUP phase
>> appears to be stored before most of the transactions, but I am having a
>> little trouble calculating where each packet starts without just looking
>> for known USB data sequences.)
>> I'm also thinking that it might be useful to compare flavio's full
>> UPSilon log with a USBlyzer log from the Windows version of NUT:
>> http://www.networkupstools.org/download.html#_binary_packages
>> Even though it is based off of the same basic codebase as the Unix
>> version of NUT (and probably won't connect to the UPS as it stands now), it
>> will be easier to compare the two .ulz files line-by-line.
>> I haven't used the Windows NUT port myself, but if you have any
>> questions, feel free to post them to the list.
>> --
>> Charles Lepple
>> clepple at gmail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20130126/4c0ef15a/attachment.html>

More information about the Nut-upsdev mailing list