[Nut-upsdev] Updated to 2.6.5, previously-working APC SmartUPS now fails completely

[Philip Tait]

(Note that I mentioned this *was* previously working with an older version
of Nut).

[irs2-ups1]
    driver = snmp-ups
    port = irs2-ups1.sum.naoj.org
    mibs = auto
    community = private


irs2-ups1.sum.naoj.org responds to pings.


On Tue, Oct 8, 2013 at 3:55 PM, Tim Rice <tim at multitalents.net> wrote:

> On Tue, 8 Oct 2013, Philip Tait wrote:
>
> > Here is the upsc output:
> >
> > # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1
> > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
> >    0.000000     debug level is '2'
> >    0.000327     SNMP UPS driver : entering upsdrv_initups()
> [snip]
> >    4.457750     No supported device detected
>
> I'm using a APC smart ups with a ap9630 card here just fine.
> How about showing us the irs2-ups1 entry in ups.conf.
>
>
> --
> Tim Rice                                Multitalents
> tim at multitalents.net
>
>
>
> _______________________________________________
> Nut-upsdev mailing list
> Nut-upsdev at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
>



-- 
Philip J. Tait, Instrument Software Engineer
http://subarutelescope.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20131008/3bca0536/attachment.html>