[Nut-upsdev] Updated to 2.6.5, previously-working APC SmartUPS now fails completely

[Philip Tait]

It's starting to look like the AP9630 card is "having issues" - event log
shows that it keeps restarting. Sorry to bother everyone.


On Tue, Oct 8, 2013 at 4:06 PM, Philip Tait <philip at naoj.org> wrote:

> (Note that I mentioned this *was* previously working with an older version
> of Nut).
>
> [irs2-ups1]
>     driver = snmp-ups
>     port = irs2-ups1.sum.naoj.org
>     mibs = auto
>     community = private
>
>
> irs2-ups1.sum.naoj.org responds to pings.
>
>
> On Tue, Oct 8, 2013 at 3:55 PM, Tim Rice <tim at multitalents.net> wrote:
>
>> On Tue, 8 Oct 2013, Philip Tait wrote:
>>
>> > Here is the upsc output:
>> >
>> > # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1
>> > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>> >    0.000000     debug level is '2'
>> >    0.000327     SNMP UPS driver : entering upsdrv_initups()
>> [snip]
>> >    4.457750     No supported device detected
>>
>> I'm using a APC smart ups with a ap9630 card here just fine.
>> How about showing us the irs2-ups1 entry in ups.conf.
>>
>>
>> --
>> Tim Rice                                Multitalents
>> tim at multitalents.net
>>
>>
>>
>> _______________________________________________
>> Nut-upsdev mailing list
>> Nut-upsdev at lists.alioth.debian.org
>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
>>
>
>
>
> --
> Philip J. Tait, Instrument Software Engineer
> http://subarutelescope.org
>



-- 
Philip J. Tait, Instrument Software Engineer
http://subarutelescope.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20131008/59404ac8/attachment-0001.html>