[Nut-upsdev] Question on support for Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower on Freebsd 9.1.
cjd at small-tree.com
Thu Feb 6 13:41:26 UTC 2014
On 2/5/14, 9:55 PM, Charles Lepple wrote:
> On Feb 5, 2014, at 9:03 PM, Chris Duffy wrote:
>>> Please run this:
>>> /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -D
>>> and send the output back to the list.
>> Output from the above command:
>> 0.000000 debug level is '1'
>> 0.248714 Supported UPS detected with megatec protocol
>> 1.268575 Permissions problem: Input/output error
>> Network UPS Tools - Megatec/Q1 protocol USB driver 0.09 (2.6.5-Unversioned directory)
> Hmm, "Input/output error" is somewhat different than a permissions problem, so this points to some FreeBSD-specific weirdness. Unfortunately, it looks like this has been seen before, with no apparent resolution at the time:
> Can you try it with -DDDD to see if the error is on the send side?
Here is the new output plus dmesg:
/usr/local/libexec/nut/blazer_usb -a UPSonic -u root -DDDD
0.000000 debug level is '4'
0.009364 Checking device (06DA/0005) (/dev/usb//dev/ugen1.3)
0.016405 - VendorID: 06da
0.016419 - ProductID: 0005
0.016438 - Manufacturer: PPC
0.016442 - Product: USB UPS
0.016446 - Serial Number: unknown
0.016449 - Bus: /dev/usb
0.016452 Trying to match device
0.016457 Device matches
0.016485 Trying megatec protocol...
0.017411 send: Q1
0.252545 read: (244.4 244.4 229.9 028 50.0 2.19 23.1 00000001
0.252589 Status read in 1 tries
0.252602 Supported UPS detected with megatec protocol
1.288032 send: Unknown error
1.288085 Permissions problem: Input/output error
Network UPS Tools - Megatec/Q1 protocol USB driver 0.09
ugen1.3: <PPC> at usbus1 (disconnected)
uhid0: at uhub3, port 1, addr 3 (disconnected)
ugen1.3: <PPC> at usbus1
uhid0: <PPC USB UPS, class 0/0, rev 2.00/0.03, addr 3> on usbus1
> Also, any output from dmesg related to ugen?
Small Tree Communications
Direct 651-209-6509 X305
AIM/Google:cjdwoodbury at gmail.com
More information about the Nut-upsdev