[Nut-upsdev] [HCL] NHS Expert C Online 6000 supported by gamatronic

[Thiago Wiezbicki]

Device Manufacturer: NHS
Device Name: Expert C Online 6000

upsc output:


battery.charge: 100
battery.current: 0.6
battery.date: 01012014
battery.runtime: 00000
battery.runtime.low: 59940
battery.temperature: 29
battery.voltage: 210.5
device.mfr: NHS Sistemas de Energia
device.model: EXPERT GIII  8kVA
device.type: ups
driver.name: gamatronic
driver.parameter.pollinterval: 20
driver.parameter.port: /dev/ttyACM0
driver.version: 2.6.3
driver.version.internal: 0.02
input.frequency: 60.1
input.transfer.high: 265
input.transfer.low: 165
input.voltage: 217.0
input.voltage.nominal: 220
output.current: 0.0
output.frequency: 60.1
output.voltage: 120.8
ups.firmware: EXOL(02).21
ups.id: ----------------
ups.load: 000
ups.mfr: NHS Sistemas de Energia
ups.model: EXPERT GIII  8kVA
ups.power.nominal: 08000
ups.status: OL



I tested shutdown sequence when battery is low and computer turned
off. After, the UPS shuts down to and turn on when the energy came
back. All it looks ok.


Link to the description:  http://www.nhs.com.br/produtos_interna/id/TWpFeQ==



We're brazilian manufacturer of this device and used the SEC 2400
protocol with full support. All it's working ok with gamatronic
driver.




Best Regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20141112/64694c39/attachment.html>