[Nut-upsdev] [HCL] <JAWAN> <JW-UPSLC02> supported by <blazer_usb>

[David Méndez]

Device manufacturer: JAWAN tech

Name: JW-UPSLC02

Protocol: Q1 / Megatec protocol

Product Description from “nut-scanner” : “ WayTech USB-RS232 Interface
(V1.0) Baud rate 2400bps” 

vendorid = "0665"

productid = "5161"

 

[upsc output]

 

battery.charge: 100

battery.voltage: 13.60

battery.voltage.high: 13

battery.voltage.low: 10.4

battery.voltage.nominal: 12.0

device.mfr:

device.model:

device.type: ups

driver.name: blazer_usb

driver.parameter.chargetime: 43200

driver.parameter.pollinterval: 2

driver.parameter.port: auto

driver.parameter.productid: 5161

driver.parameter.vendorid: 0665

driver.version: 2.7.2

driver.version.internal: 0.11

input.current.nominal: 6.0

input.frequency: 60.0

input.frequency.nominal: 60

input.voltage: 118.0

input.voltage.fault: 118.0

input.voltage.nominal: 115

output.voltage: 118.0

ups.beeper.status: disabled

ups.delay.shutdown: 30

ups.delay.start: 180

ups.firmware: B1.12_APFB

ups.load: 29

ups.mfr:

ups.model:

ups.productid: 5161

ups.status: OL

ups.temperature: 32.0

ups.type: offline / line interactive

ups.vendorid: 0665

 

[upscmd -l <ups> output]

 

beeper.toggle - Toggle the UPS beeper

load.off - Turn off the load immediately load.on - Turn on the load
immediately shutdown.return - Turn off the load and return when power is
back shutdown.stayoff - Turn off the load and remain off shutdown.stop -
Stop a shutdown in progress test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test test.battery.start.quick
- Start a quick battery test test.battery.stop - Stop the battery test

 

 

Good Luck.

David Méndez

Bogotá, Colombia, South America.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20150220/35dff332/attachment.html>