[Nut-upsdev] Tripplite Smart Int 1000 - wrong numbers

[tuharsky at misbb.sk]

Hi, Charles

I'm trying compilation but there is no configure command in the cloned 
git directory of nut.


Dňa 08.10.2017 o 23:47 Charles Lepple napísal(a):
> On Oct 8, 2017, at 4:34 PM, tuharsky at misbb.sk wrote:
>> Thank You for You reply, Charles
>>
>>
>> Dňa 07.10.2017 o 14:30 Charles Lepple napísal(a):
>>> Is the "lan4.1" cable different from this one? http://networkupstools.org/cables.html#_tripp_lite
>> Yes, it is different. The correct cable for this interface version looks like this:
>> http://pinouts.ru/UPS/tripplite_smartpro_cable_pinout.shtml
> Thanks, I just created an issue to remind me about that later: https://github.com/networkupstools/nut/issues/487
>
>>> Are you comfortable with rebuilding the drivers?
>>>
>>> I think the best thing might be to see if your UPS responds to the same protocol query command that is used in tripplite_usb:
>>>
>> Seems that it could help tripplite tree as such... Charles, well, I'm not a programmer, but if You send me instructions and/or howto, I'll try my best.
>>
>> I have Debian 9 so please decide, whether it would suffice to use the distributional source packages or whether build from "raw" upstream source, and instruct me accordingly.
> You might want to rebuild the .deb packages later, but for now, the quickest way is probably from source.
>
> 1) make sure you have "deb-src" lines to match the "deb" lines in /etc/apt/sources
> 2) run "sudo apt-get update" if you had to change anything
> 3) run "sudo apt-get build-dep nut"
> 3.5) optional: remove "asciidoc" (or install the build-deps manually, and omit asciidoc) to save a bit of build time
> 4) run "sudo apt-get -y install git" if you do not already have Git installed
> 5) clone the source to your working directory: "git clone https://github.com/networkupstools/nut.git"
> 6) "cd nut" and run this mega-command:
>
> ./configure --includedir=/usr/include --mandir=/usr/share/man \
>          --infodir=/usr/share/info --sysconfdir=/etc/nut --localstatedir=/var \
>          --libexecdir=/usr/lib/nut --srcdir=. --enable-maintainer-mode \
>          --disable-silent-rules --libdir=/usr/lib/x86_64-linux-gnu \
>          --with-ssl --with-nss --with-cgi --with-dev --enable-static \
>          --with-statepath=/var/run/nut --with-altpidpath=/var/run/nut \
>          --with-drvpath=/lib/nut --with-cgipath=/usr/lib/cgi-bin/nut \
>          --with-htmlpath=/usr/share/nut/www --with-pidpath=/var/run/nut \
>          --datadir=/usr/share/nut --with-pkgconfig-dir=/usr/lib/x86_64-linux-gnu/pkgconfig \
>          --with-user=nut --with-group=nut --with-udev-dir=/lib/udev \
>          --with-systemdsystemunitdir=/lib/systemd/system
>
> 7) run "make"
>
> Hopefully that works, and in the mean time, I will work on a quick patch that will attempt to grab the protocol number.
>