[Nut-upsdev] [HCL] Cyber Power Systems UT1050EIG supported by usbhid-ups

[Andrew Stutterheim]

Device Manufacturer: Cyber Power Systems
Model: UT1050EIG
Manufacturer web page:
https://www.cyberpower.com/uk/en/product/sku/ut1050eig

The shutdown sequence has been tested and works.

upsc output:
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 6150
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 88.7
battery.voltage.nominal: 24
device.mfr: CPS
device.model: UT1050EG
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ugen5.2
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: CyberPower HID 0.4
driver.version.internal: 0.41
input.transfer.high: 295
input.transfer.low: 167
input.voltage: 230.0
input.voltage.nominal: 230
output.voltage: 230.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 9
ups.mfr: CPS
ups.model: UT1050EG
ups.productid: 0501
ups.realpower.nominal: 630
ups.status: OL
ups.test.result: No test initiated
ups.timer.shutdown: -60
ups.timer.start: -60
ups.vendorid: 0764

Best regards,

Andrew Stutterheim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20211028/5b2c17fc/attachment.htm>