[Nut-upsdev] [HCL] Liebert GXT4-1500RT120 supported by usbhid-ups

[Lucas Rossi]

Liebert GXT4-1500RT120

upsc output:

battery.charge: 100
battery.charge.low: 30
battery.charge.warning: 40
battery.type: PbAcbattery.voltage: 54
battery.voltage.nominal: 48
device.mfr: Emerson Network Power
device.model: Liebert GXT4
device.serial: 1710600384AFBA3
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.flag.ignorelb: enableddriver.name: usbhid-ups
driver.parameter.default.battery.voltage: 54
driver.parameter.default.battery.voltage.nominal: 48
driver.parameter.default.input.voltage: 120
driver.parameter.default.input.voltage.nominal: 120
driver.parameter.override.battery.charge.low: 30
driver.parameter.override.battery.charge.warning: 40
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0000
driver.parameter.synchronous: auto
driver.state: quiet
driver.version: 2.8.1.1
driver.version.data: Belkin/Liebert HID 0.18
driver.version.internal: 0.52
driver.version.usb: libusb-1.0.0 (API: 0x1000102)input.voltage: 120
input.voltage.nominal: 120
ups.mfr: Emerson Network Power
ups.model: Liebert GXT4
ups.productid: 0000
ups.serial: 1710600384AFBA3
ups.status: OL CHRG
ups.vendorid: 10af


upsrw output:

[driver.debug]
Current debug verbosity level of the driver program
Type: NUMBER
Value: 0

[driver.flag.allow_killpower]
Safety flip-switch to allow the driver daemon to send UPS shutdown
command (accessible via driver.killpower)
Type: NUMBER
Value: 0


upsrw -l output:

Instant commands supported on UPS [ups]:

driver.killpower - Tell the driver daemon to initiate UPS shutdown;
should be unlocked with driver.flag.allow_killpower option or variable
setting
driver.reload - Reload running driver configuration from the file
system (only works for changes in some options)
driver.reload-or-error - Reload running driver configuration from the
file system (only works for changes in some options); return an error
if something changed and could not be applied live (so the caller can
restart it with new options)
driver.reload-or-exit - Reload running driver configuration from the
file system (only works for changes in some options); exit the running
driver if something changed and could not be applied live (so service
management framework can restart it with new options)


usbhid arguments:

desc = "Emerson Network Power Liebert GXT4"
productid = 0000
ignorelb
override.battery.charge.warning = 40
override.battery.charge.low = 30
default.input.voltage.nominal = 120
default.input.voltage = 120
default.battery.voltage.nominal = 48
default.battery.voltage = 54

UPS shutdown has been tested.

I suspect these same parameters will also work for other GXT4 models and
the GXT3 family as well, since they seem to share the same controller.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20240922/bb16b849/attachment.htm>