[Nut-upsuser] problems from a starter
h.swensson at hccnet.nl
Sun Aug 14 17:39:00 UTC 2005
I have installed nut 2.0
Aug 14 16:37:26 server kernel: hiddev96: USB HID v1.10 Device [American
Power Conversion Back-UPS BF500 FW:814.s3.I USB FW:s3] on
Aug 14 16:37:26 server kernel: hub 5-0:1.0: USB hub found
Aug 14 16:37:26 server kernel: hub 5-0:1.0: 2 ports detected
My ups.conf : [APC350]
driver = apcsmart
port = /dev/usb/hidddev96
desc = "APC UPS"
[root at server etc]# /usr/local/ups/bin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.2
Network UPS Tools (version 2.0.2) - APC Smart protocol driver
Driver version 1.99.7, command table version 2.0
Unable to open /dev/usb/hidddev96: No such file or directory
Things to try:
- Check 'port=' in ups.conf
- Check owner/permissions of all parts of path
Fatal error: unusable configuration
Driver failed to start (exit status=1)
What must I change to get it work
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.8/71 - Release Date: 12-8-2005
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser