[Nut-upsuser] Tripp Lite Internet Office 350VA
selinger at mathstat.dal.ca
Tue Dec 6 17:43:28 UTC 2005
Could it be that this is really a HID device, and the driver simply
hasn't implemented all the features? If this is the case, it might be
worthwhile getting the Development NUT version and running
drivers/newhidups -u root -DD -x generic auto
just to see the debugging output. Samuel, could you do this?
Charles Lepple wrote:
> On 12/6/05, Peter Selinger <selinger at mathstat.dal.ca> wrote:
> > Dear Samuel,
> > thanks for your work. It would be great if you could integrate your
> > driver with NUT, but check first that it does not overlap with an
> > existing driver in the driver/ directory. I looked briefly at your
> > code, but I could not find a human-readable protocol description.
> I didn't have much time to look at it either, but it looks like you
> are doing some HID-type transactions (but not full HID Power Device
> Class stuff).
> It might be closest to the tripplite_usb driver (minus the Tripp Lite
> protocol). That driver basically encapsulates some of the Tripp Lite
> serial protocol in HID packets.
> Since the structure of that driver is still fresh in my mind, I can
> help you create a driver based on that one (as long as you don't mind
> Can you send the output of 'cat /proc/bus/usb/devices' and 'lsusb
> -vvv' (run as root, trimmed to only show the UPS)?
> - Charles Lepple
More information about the Nut-upsuser