[Nut-upsuser] Re: MGE Protection Center and Suse

[Johannes Schatz]

Hi

> mea culpa: should be "/etc/hotplug/usb/libhidups"

ok try with the right path:

backup:~ # export ACTION=add && export TYPE=USB && export 
DEVICE=/proc/bus/usb/002/002 && /etc/hotplug/usb/libhidups
no output !?

> Note that the permissions can be applied up to
> 10 seconds after the USB cable is plugged back
> (FYI, the performance problem is addressed with
> hotplug-ng, which is a binary, not a script)

I wait more than 10 sec. but still the same

> - is hotplug running: "/etc/init.d/hotplug status"

backup:~ # /etc/init.d/hotplug status
-bash: /etc/init.d/hotplug: No such file or directory

> - is "/etc/hotplug/usb/libhidups" executable (rwxr-xr-x)?

-rwxr-xr-x  1 root root   481 Jul  1 14:11 libhidups

> - are there message about hotplug in the syslog after
> you replug the USB cord?

Jul 27 10:56:02 backup kernel: usb 2-1: USB disconnect, address 2
Jul 27 10:56:08 backup kernel: ohci_hcd 0000:00:02.3: wakeup
Jul 27 10:56:09 backup kernel: usb 2-1: new low speed USB device using 
ohci_hcd and address 3
Jul 27 10:56:10 backup kernel: usbhid: probe of 2-1:1.0 failed with 
error-5

Very strange that there is no /etc/init.d/hotplug
Maybe my mistake?

Hope you see the failure

Johannes Schatz
Dung Marketig GmbH & Co KG