[Nut-upsuser] trying to use powerware 3110 USB with NUT

[John H.]

same problem


 bcmxcp_usb -DD -a PW3 -u nut
Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0)

debug level is '2'
Communications with UPS lost: Receive error (Request command): COMMAND: 31

RECONNECT USB DEVICE

Communications with UPS lost: Receive error (Request command): COMMAND: 31

RECONNECT USB DEVICE

Communications with UPS lost: Receive error (Request command): COMMAND: 31

RECONNECT USB DEVICE

Communications with UPS lost: Receive error (Request command): COMMAND: 31

RECONNECT USB DEVICE

Communications with UPS lost: Receive error (Request command): COMMAND: 31

RECONNECT USB DEVICE

Communications with UPS lost: Error executing command
Could not communicate with the ups: Bad address



On 10/6/05, Kjell Claesson <kjell.claesson at telia.com> wrote:
> Hi John.
>
> This is a loongshot, but if you can insert this line into the
> bcmxcp_usb.c
>
> 8<---------------------------------------------
> void upsdrv_initups(void)
> {
>         experimental_driver=1;
>
>         upsdev = nutusb_open("USB");
>         usb_set_descriptor(upsdev, USB_DT_STRING, 4, 0x1d, 1);
>
> }
> 8<--------------------------------------------------
>
> Find the 'void upsdrv_initups(void)' function
> and insert the.
>
> usb_set_descriptor(upsdev, USB_DT_STRING, 4, 0x1d, 1);
>
> So it looks like abowe.
>
> Kjell
>
>
>
>
>
> tor 2005-10-06 klockan 10:43 -0500 skrev John H.:
> > i'm not going to give up, I want to monitor my UPS:)
> >
> >
> > On 10/6/05, Kjell Claesson <kjell.claesson at telia.com> wrote:
> > > Hi John.
> > >
> > > Well now it answer to the driver, but the command 31 (get identification
> > > block) does not return anything.
> > >
> > > This may due to the fact that it is in a menu mode or something.
> > > Maybe we have to send some other commands before the request of the
> > > id block. Se what Wolfgang have to say about it.
> > >
> > > Kjell
> > >
> > > P.S. Don't give up. This is good information for us.
> > >
> > > tor 2005-10-06 klockan 09:24 -0500 skrev John H.:
> > > >  bcmxcp_usb -DD -a PW3 -u nut
> > > > Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0)
> > > >
> > > > debug level is '2'
> > > > Communications with UPS lost: Receive error (Request command): COMMAND: 31
> > > >
> > > > RECONNECT USB DEVICE
> > > >
> > > > Communications with UPS lost: Receive error (Request command): COMMAND: 31
> > > >
> > > > RECONNECT USB DEVICE
> > > >
> > > > On 10/6/05, Wolfgang Ocker <weo at weo1.de> wrote:
> > > > > On Thu, 2005-10-06 at 08:54 +0200, Wolfgang Ocker wrote:
> > > > > > On Wed, 2005-10-05 at 19:25 -0500, John H. wrote:
> > > > > > > debug level is '2'
> > > > > > > Can't open POWERWARE USB device, retrying ...
> > > > > >
> > > > > > Okay, I found the reason: The vendor id of the device has to be added in
> > > > > > nut_usb.c:
> > > > >
> > > > > John, the patch is in the CVS. Would you please update and test?
> > > > >
> > > > > Wolfgang
> > > > > --
> > > > > | Wolfgang Ocker  |  http://weo1.de/
> > > > > | 49.8441.805512  |  mailto:weo at weo1.de
> > > > > | Programmieren Sie noch oder patentieren Sie schon?
> > > > > | -> http://www.nosoftwarepatents.com/
> > > > >
> > > > >
> > > >
> > > > _______________________________________________
> > > > Nut-upsuser mailing list
> > > > Nut-upsuser at lists.alioth.debian.org
> > > > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
> > >
> > >
>
>