[Nut-upsuser] Fenton Powerpal L1400R "Not Supported" message...

[Simon]

Hi There,

Running on debian sarge. This was working a while ago, but here goes.. 
When viewing the upsstats.cgi page, im getting a message "Not Supported" 
in the Model column with a "ONLINE" message, but no other stats.

Here is the syslog when booting nut:

Oct 15 14:28:40 mx1 upsmon[4835]: Signal 15: exiting
Oct 15 14:28:40 mx1 upsmon[4834]: upsmon parent: read: Success
Oct 15 14:28:46 mx1 fentonups[4856]: Startup successful
Oct 15 14:28:46 mx1 upsd[4857]: Connected to UPS [ups]: fentonups-ttyS0
Oct 15 14:28:47 mx1 upsd[4858]: Startup successful
Oct 15 14:28:47 mx1 upsmon[4860]: Startup successful
Oct 15 14:28:47 mx1 upsd[4858]: Connection from 127.0.0.1

Here is the output of /sbin/upsdrvctl start:

Network UPS Tools - UPS driver controller 2.0.1
Network UPS Tools - Fenton UPS driver 1.22 (2.0.1)
Detected PowerPal 1400RE on /dev/ttyS0

So its seeing the UPS, but then reporting as unsupported... WTF?

Any ideas on what todo here?

Thanks

Simon