[Nut-upsuser] trying to use powerware 3110 USB with NUT

John H. mistamaila at gmail.com
Fri Sep 23 06:05:10 UTC 2005

Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says

T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=06da ProdID=0002 Rev= 0.01
S: Manufacturer=POWERWARE
S: Product=Powerware UPS
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms

why does it say driver=none? how do i get it to say hid?

i am on fc4 machine, and I edited ups.conf to say

driver = hidups
port = /dev/usb/hid/hiddev0

as I used the make-hiddev script from apcupsd, which created that there.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20050923/c9fd3490/attachment.html

More information about the Nut-upsuser mailing list