[Nut-upsuser] trying to use powerware 3110 USB with NUT

[Kjell Claesson]

Hi John.

It's not a hid device. Use the development cvs and build the bcmxcp_usb
driver. The ups may work with that. 3105 and 5115 is reported working.

Kjell Claesson

fre 2005-09-23 klockan 01:05 -0500 skrev John H.:
> Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices
> says this
> 
> T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=06da ProdID=0002 Rev= 0.01
> S:  Manufacturer=POWERWARE
> S:  Product=Powerware UPS
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=20ms
> 
> 
> why does it say driver=none? how do i get it to say hid?
> 
> i am on fc4 machine, and I edited ups.conf to say
> 
> [PW3]
>          driver = hidups
>          port = /dev/usb/hid/hiddev0
> 
> 
> as I used the make-hiddev script from apcupsd, which created that
> there.
> 
> thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20050923/8c1c3a6a/attachment.pgp