[Nut-upsuser] RE nut drivers

Kjell Claesson kjell.claesson at telia.com
Sun Aug 6 13:50:10 UTC 2006


Hi Alexander,
sön 2006-08-06 klockan 14:36 +0400 skrev Alexander Zubkov:
> I've updated to 2.0.4 and changed driver to megatec. It is working too.
> Old info, showed by fentonups:
> battery.charge: 100.0
> battery.voltage: 28.0
> driver.name: fentonups
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.0.3
> driver.version.internal: 1.22
> input.frequency: 49.9
> input.voltage: 221.0
> output.voltage: 223.6
> ups.load: 032
> ups.mfr:  FUDEN
> ups.model: Unknown S163-1000
> ups.status: OL TRIM
> 
> Now it is more verbose :)
> battery.charge: 100.0
> battery.voltage: 28.00
> battery.voltage.nominal: 24.0
> driver.name: megatec
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.0.4
> driver.version.internal: 1.4
> input.frequency: 49.9
> input.voltage: 219.3
> input.voltage.fault: 140.0
> input.voltage.maximum: 220.1
> input.voltage.minimum: 218.6
> output.voltage: 221.8
> output.voltage.nominal: 230.0
> ups.delay.shutdown: 2
> ups.delay.start: 3
> ups.load: 30.0
> ups.mfr: FUDEN
> ups.model: S163-1000 9.02A
> ups.serial: unknown
> ups.status: OL BOOST
> ups.temperature: 38.8
> 
> It is "PowerMan RealSmart 1000" model. I can also try to check PowerMan 
> BackPro model (I have access to machine with it) if it really works with 
> genericups.
> 

Thanks for the info. I change the driver to megatec for the RealSmart 
1000 and 800 in the driver.list.

I wait for the result on the BackPro.


> > 
> > let's wait for feedback from Alexander on how his dev behave with megatec.
> > 
>  Arnaud
> 

Regards
Kjell





More information about the Nut-upsuser mailing list