[Nut-upsuser] cyberpower 685avr problems with FC5

henri henri at qais.com
Fri Dec 1 18:41:16 CET 2006

i can't seem to get newhidups to detect my UPS.. 

i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling
my own)

here is the entry for the UPS in /proc/bus/usb/devices

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0764 ProdID=0501 Rev= 0.01
S:  Manufacturer=CPS
S:  Product=UPS BF700
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 50mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

trimmed output of:

# newhidups -DD -u root  -x vendorid=0764 auto
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)

debug level is '2'
Checking device (0764/0501) (004/002)
- VendorID: 0764
- ProductID: 0501
- Manufacturer: CPS
- Product: UPS BF700
- Serial Number: unknown
- Bus: 004
Trying to match device
Device does not match - skipping
No appropriate HID device found
No matching USB/HID UPS found

# dmesg | grep BF700
hiddev96: USB HID v1.10 Device [CPS UPS BF700] on usb-0000:00:1d.2-1

i'm not sure what else to do. 

/etc/ups/ups.conf doesn't have anything in it (everything is commented



More information about the Nut-upsuser mailing list