[Nut-upsuser] cyberpower 685avr problems with FC5

Peter Selinger selinger at mathstat.dal.ca
Fri Dec 1 19:01:25 CET 2006


CyberPower support was added to newhidups after release 2.0.3 (a very
old release).  You should use NUT 2.0.4, or even better: the newest
development snapshot from SVN (http://www.networkupstools.org/source.html)

-- Peter

henri wrote:
> 
> 
> i can't seem to get newhidups to detect my UPS.. 
> 
> i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling
> my own)
> 
> here is the entry for the UPS in /proc/bus/usb/devices
> 
> T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0764 ProdID=0501 Rev= 0.01
> S:  Manufacturer=CPS
> S:  Product=UPS BF700
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 50mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> 
> 
> trimmed output of:
> 
> # newhidups -DD -u root  -x vendorid=0764 auto
> Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
> 
> debug level is '2'
> Checking device (0764/0501) (004/002)
> - VendorID: 0764
> - ProductID: 0501
> - Manufacturer: CPS
> - Product: UPS BF700
> - Serial Number: unknown
> - Bus: 004
> Trying to match device
> Device does not match - skipping
> No appropriate HID device found
> No matching USB/HID UPS found
> 
> 
> 
> # dmesg | grep BF700
> hiddev96: USB HID v1.10 Device [CPS UPS BF700] on usb-0000:00:1d.2-1
> 
> 
> i'm not sure what else to do. 
> 
> /etc/ups/ups.conf doesn't have anything in it (everything is commented
> out)
> 
> thanks
> 
> henri
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
> 




More information about the Nut-upsuser mailing list