[Nut-upsuser] cyberpower 685avr problems with FC5

Henri henri at qais.com
Fri Dec 1 19:07:59 CET 2006


that was easy enough. 

thank you

henri

On 1 Dec 2006, selinger at mathstat.dal.ca (Peter Selinger) wrote: 

> CyberPower support was added to newhidups after release 2.0.3 (a very
> old release).  You should use NUT 2.0.4, or even better: the newest
> development snapshot from SVN (http://www.networkupstools.org/source.html)
> 
> -- Peter
> 
> henri wrote:
> > 
> > 
> > i can't seem to get newhidups to detect my UPS.. 
> > 
> > i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling
> > my own)
> > 
> > here is the entry for the UPS in /proc/bus/usb/devices
> > 
> > T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
> > D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > P:  Vendor=0764 ProdID=0501 Rev= 0.01
> > S:  Manufacturer=CPS
> > S:  Product=UPS BF700
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 50mA
> > I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
> > E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> > 
> > 
> > trimmed output of:
> > 
> > # newhidups -DD -u root  -x vendorid=0764 auto
> > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
> > 
> > debug level is '2'
> > Checking device (0764/0501) (004/002)
> > - VendorID: 0764
> > - ProductID: 0501
> > - Manufacturer: CPS
> > - Product: UPS BF700
> > - Serial Number: unknown
> > - Bus: 004
> > Trying to match device
> > Device does not match - skipping
> > No appropriate HID device found
> > No matching USB/HID UPS found
> > 
> > 
> > 
> > # dmesg | grep BF700
> > hiddev96: USB HID v1.10 Device [CPS UPS BF700] on usb-0000:00:1d.2-1
> > 
> > 
> > i'm not sure what else to do. 
> > 
> > /etc/ups/ups.conf doesn't have anything in it (everything is commented
> > out)
> > 
> > thanks
> > 
> > henri
> > 
> > _______________________________________________
> > Nut-upsuser mailing list
> > Nut-upsuser at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
> > 
> 



More information about the Nut-upsuser mailing list