[Nut-upsuser] Help with nut 2.0.4, MGE Ellipse 1000 and FreeBSD

[Miwa Forever]

2006/12/29, Miwa Forever <miwaonline at gmail.com>:
>
>
>
> 2006/12/28, Peter Selinger <selinger at mathstat.dal.ca>:
> >
> >
> > Following your second email on Dec 27, I don't think any of this is a
> > problem. Actually, it seems that both your driver and upsd are working
> > fine. It is just that the driver gets disconnected occasionally from
> > upsd (times out). Probably all you have to do is set MAXAGE in
> > upsd.conf to allow for a longer timeout. See 'man upsd.conf'.
> >
> > -- Peter
> >
> >
> >   First of all i want to say i'm sorry
> for worry with my letters and stupid problem, but i really don't want to write all
> these letters "just for fun".
>
> As for changing MAXAGE directive - with values 60 and greater ups become
> available from pc, at least i can see it's state with upsc. But in
> /var/log/messages we can see next:
>
> Dec 29 17:13:37 zork3 upsd[14370]: UPS [MGE-Ellipse] data is no longer
> stale
> Dec 29 17:13:39 zork3 upsd[14370]: Data for UPS [MGE-Ellipse] is stale -
> check driver
> Dec 29 17:13:39 zork3 upsd[14370]: UPS [MGE-Ellipse] data is no longer
> stale
> Dec 29 17:13:42 zork3 upsd[14370]: Data for UPS [MGE-Ellipse] is stale -
> check driver
> Dec 29 17:13:42 zork3 upsd[14370]: UPS [MGE-Ellipse] data is no longer
> stale
> Dec 29 17:13:44 zork3 upsd[14370]: Data for UPS [MGE-Ellipse] is stale -
> check driver
> Dec 29 17:13:44 zork3 upsd[14370]: UPS [MGE-Ellipse] data is no longer
> stale
> Dec 29 17:13:47 zork3 upsd[14370]: Data for UPS [MGE-Ellipse] is stale -
> check driver
> Dec 29 17:13:47 zork3 upsd[14370]: UPS [MGE-Ellipse] data is no longer
> stale
> Dec 29 17:13:50 zork3 upsd[14370]: Data for UPS [MGE-Ellipse] is stale -
> check driver
> Dec 29 17:13:50 zork3 upsd[14370]: UPS [MGE-Ellipse] data is no longer
> stale
>
> I'm not sure that it's good desision to leave this "as is". Am i right?
>

It's me again.
After restarting (/usr/local/etc/rc.d/nut.sh stop +
start) situation returned to previous state (as befire changinf
MAXAGE) - only one "Data stale" during starting upsd and
unavailability to see status of ups via upsc. I changed values of
MAXAGE from 15 to 90 with step 5, restarted upsd - nothing changed.
Data is constantly stale.

What else can i do?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20061229/d4985188/attachment.html