[Nut-upsuser] Gentoo Ultra USB UPS
Barry Fawthrop
barry at ttienterprises.org
Mon Jul 31 22:32:46 UTC 2006
Hi all
I recompiled nut and now have newhidups
/etc/init.d/upsd start
* Caching service dependencies
...
[ ok ]
* Starting UPS drivers ...
Network UPS Tools - UPS driver controller 2.0.3
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
No matching USB/HID UPS found
Driver failed to start (exit status=1)
* Failed to start UPS
drivers!
[ !! ]
* ERROR: Problem starting needed services.
* "upsd" was not started.
the upsdrvctl part seems now to move further along ?
Jonathan Dion wrote:
> Hello Barry.
>
> On 7/31/06, *Barry Fawthrop* <barry at ttienterprises.org
> <mailto:barry at ttienterprises.org>> wrote:
>
> Thanks Charles
>
> Now I'm getting this error when starting
>
> * Starting UPS drivers ...
> Network UPS Tools - UPS driver controller 2.0.3
> Network UPS Tools: HID UPS driver 0.13 (2.0.3)
>
> Warning: This is an experimental driver.
> Some features may not function correctly.
>
> /dev/usb/hiddev0 is not a UPS
>
> Driver failed to start (exit status=1)
>
> # lsusb
> Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd
> Bus 001 Device 001: ID 0000:0000
>
> /dev/usb/hiddev0 is the UPS I'm sure (but not 100%)
>
> Thanks
> Barry
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> <mailto:Nut-upsuser at lists.alioth.debian.org>
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>
>
>
> You should try to use the newhidups driver, which allow you to put the
> port to auto :
>
> ups.conf
> =========
> [Ultra1]
> driver = newhidups
> port = auto
>
> Cheers,
>
> Jonathan Dion
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.5/403 - Release Date: 7/28/2006
>
More information about the Nut-upsuser
mailing list