[Nut-upsuser] Strange voltage values (powercom KIN-1500AP RM)

[Pavel Samek]

Should I change
voltage={coefficient1,coefficient2,coefficient3,coefficient4}
batteryPercentage={coefficient1,coefficient2,coefficient3,coefficient4,coefficient5}
in some way to get proper output values? The reported voltage values are
every time about 270, it is not an exception! The upsmon, upsdisp
utilities from PowerCom report proper values about 230 and battery
charge 100. When on battery the values are totally useless - I get
battery charge 166, output.voltage 30 ...

Does someone have any idea?

Pavel Samek napsal(a):
> Hi,
> 
> I have following strange voltage values or is it OK?
> 
> # upsc powercomUPS at localhost
> battery.charge: 102.3
> driver.name: powercom
> driver.parameter.modelname: KIN-1500RM
> driver.parameter.port: /dev/ttyS0
> driver.parameter.type: KIN1500AP
> driver.version: 2.0.3
> driver.version.internal: $ Revision: 0.5 $
> input.frequency: 49.61
> input.voltage: 270.8
> input.voltage.nominal: 230
> output.frequency: 49.61
> output.voltage: 270.8
> ups.load: 33.5
> ups.mfr: PowerCom
> ups.model: KIN-1500RM
> ups.model.type: KIN1500AP
> ups.serial: Unknown
> ups.status: OL
> 
> 
> # cat ups.conf
> [powercomUPS]
>         driver = powercom
>         port = /dev/ttyS0
>         desc = "ServerUPS"
>         modelname = KIN-1500RM
>         type = KIN1500AP
> 
> Thanks in advance.
> 
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser