[Nut-upsuser] Re: POWER WALKER LINE-INTERACTIVE VI1000

[Arnaud Quette]

thanks for the feedback Mathias.
Note that the megatec unknown ups.{mfr,model} is under resolution by
Carlos, so he might ask your for further testing...

2006/3/29, Mathias Mayrhofer <mtmayr at mg34.vc-graz.ac.at>:
> I first had to install the development version, and I did that for your
> asking.
> And the result is better with megatec than with mustek.
>
> greetings,
> Mathias
>
>
>
> output mustek:
> ==========
> battery.charge: 100.0
> battery.voltage: 26.6
> driver.name: mustek
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.0.3
> driver.version.internal: 0.2
> input.frequency: 49.9
> input.voltage: 225.8
> output.voltage: 225.8
> ups.load: 016
> ups.mfr: Mustek
> ups.model: PowerMust
> ups.status: OL
>
> output mustek: (new)
> ==============
>
> battery.charge: 100.0
> battery.voltage: 26.6
> driver.name: mustek
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.1.0
> driver.version.internal: 0.2
> input.frequency: 49.9
> input.voltage: 225.8
> output.voltage: 225.8
> ups.load: 016
> ups.mfr: Mustek
> ups.model: PowerMust
> ups.status: OL
>
>
> output megatec: (new)
> ===============
>
> battery.charge: 100.0
> battery.voltage: 26.6
> battery.voltage.nominal: 12.0
> driver.name: megatec
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.1.0
> driver.version.internal: 1.4
> input.frequency: 49.9
> input.voltage: 226.7
> input.voltage.fault: 226.7
> input.voltage.maximum: 227.2
> input.voltage.minimum: 225.8
> output.voltage: 226.7
> output.voltage.nominal: 230.0
> ups.delay.shutdown: 2
> ups.delay.start: 3
> ups.load: 16.0
> ups.mfr: unknown
> ups.model: unknown
> ups.serial: unknown
> ups.status: OL
> ups.temperature: 25.0
>
>
>
> Arnaud Quette wrote:
> > can you also give a try to megatec and send us back some upsc output
> > of your various tests?
> >
> > Mathias Mayrhofer wrote:
> >
> >>> Arnaud QUETTE wrote:
> >>>
> >>>> Mathias Mayrhofer wrote:
> >>>>
> >> it works (except of the temperature)
> >>
> >> thanks a million!!
> >>
> >>
> >>>> Sorry to bother you,
> >>>> 'nut' is great (it was the only thing that worked on by belkin usv),
> >>>>
> >>> but
> >>>
> >>>> I have problems with this thing:
> >>>> "POWER WALKER LINE-INTERACTIVE VI1000"
> >>>>
> >>>> I tried all generic drivers, do you have any experiences with this
> >>>>
> >>> model?
> >>>
> >>>> ( http://www.conrad.de/script/power_walker_usv-39.sap )
> >>>>
> >>> there was just a report for that kind of unit:
> >>> http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-March/000803.html
> >>>
> >
> > Arnaud Quette
> > --
> > Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
> > Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
> > Debian Developer - http://people.debian.org/~aquette/
> > OpenSource Developer - http://arnaud.quette.free.fr/
> >
>
>