[Nut-upsuser] TrippLite SmartPro UPS and nut-2.0.2

[Nick Golder]

On 2006-05-09 17:00 -0400, Charles Lepple wrote:
> >Detected a UPS: TRIPP LITE/  TRIPP LITE SMART3000RM2U
> 
> This looks good.

If I try to kill (ctrl+c) the above command I get the following:
^CUSB error: error reading from interrupt endpoint /dev/ugen0.1: Interrupted system call
libusb_get_interrupt() returned -4 instead of 8
Unknown battery voltage: 0x3038
Unknown protocol (4)Attached to Tripp Lite TRIPP LITE SMART3000RM2U
^CUSB error: error reading from interrupt endpoint /dev/ugen0.1: Interrupted system call
libusb_get_interrupt() returned -4 instead of 8
Unknown value for s[2]: 0x34
dstate_init: sock /var/db/nut/tripplite_usb-auto open on fd 6
Signal 2: exiting
Closing device
usb_os_close: closing endpoint 5

> 
> >No matching USB/HID UPS found
> >Driver failed to start (exit status=1)
> 
> You may have to check permissions on /dev/ugen0.

# sudo usbdevs -d | grep -A 2 -B 1 uhub1
addr 1: UHCI root hub, Intel
  uhub1
 addr 2: TRIPP LITE SMART3000RM2U, TRIPP LITE
   ugen0

# ls -lah /dev/ugen0
crw-rw----  1 root  operator    0,  78 May 10 08:46 /dev/ugen0

# ls -lah /dev/usb1 
crw-rw----  1 root  operator    0,  34 May 10 08:46 /dev/usb1

What would be the proper way to attach the driver to a device in
ups.conf under FreeBSD? 

Thanks,
-nrg