[Nut-upsuser] TrippLite SmartPro UPS and nut-2.0.2

[Charles Lepple]

On 5/9/06, Nick Golder <nrg at timing.com> wrote:
> On 2006-04-01 17:37 -0500, Charles Lepple wrote:
> > The SMART1500RM2U (which I assume is just a smaller version of the
> > 3000RM2U) has a USB plug on the back - would that work for your setup?
> > The tripplite_usb driver is still a work-in-progress, but it does
> > detect the 1500.
>
> OS: FreeBSD 6.1-STABLE
> NUT: 2.0.3
> UPS: TrippLite SMART3000RM2U
>
> I finally got around to moving the UPS onto a FreeBSD 6.1-STABLE box using
> the tripplite_usb driver.  Again, this is a SMART3000RM2U.  Note that I
> had to disable uhid in the kernel config as noted in a thread from this
> week.
>
> $ USB_DEBUG=2 sudo /usr/local/libexec/nut/tripplite_usb -u root -DD auto
> Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3)
> Warning: This is an experimental driver.
> Some features may not function correctly.
>
> debug level is '2'
> usb_set_debug: Setting debugging level to 2 (on)
> usb_os_find_busses: Found /dev/usb0
> usb_os_find_busses: Found /dev/usb1
> usb_os_find_busses: Found /dev/usb2
> usb_os_find_busses: Found /dev/usb3
> usb_os_find_busses: Found /dev/usb4
> usb_os_find_devices: Found /dev/ugen0 on /dev/usb1
> skipped 1 class/vendor specific interface descriptors
> Checking device (09AE/0001) (/dev/usb1//dev/ugen0)
> - VendorID: 09ae
> - ProductID: 0001
> - Manufacturer: TRIPP LITE
> - Product:   TRIPP LITE SMART3000RM2U
> - Serial Number: unknown
> - Bus: /dev/usb1
> Trying to match device
> Device matches
> USB error: could not set alt intf 0/0: Invalid argument
> HID descriptor retrieved (Reportlen = 52)
> Report descriptor retrieved (Reportlen = 52)
> Found HID device
> Report Descriptor size = 52
> Detected a UPS: TRIPP LITE/  TRIPP LITE SMART3000RM2U

This looks good.

> When I try to start upsdrvctl, I get this:
> Network UPS Tools - UPS driver controller 2.0.3
> Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3)
> Warning: This is an experimental driver.
> Some features may not function correctly.
>
> No matching USB/HID UPS found
> Driver failed to start (exit status=1)

You may have to check permissions on /dev/ugen0.

--
- Charles Lepple