[Nut-upsuser] Tripplite SU2200XL

[Kirk Bocek]

Gregory,
I installed an SNMP web card in my Tripplite ups and here's what I get:

$upsc tripplite1-snmp at localhost
battery.charge: 100.0
battery.voltage: 008.1
driver.name: snmp-ups
driver.parameter.mibs: ietf
driver.parameter.pollfreq: 15
driver.parameter.port: tripplite1.pvt
driver.parameter.snmp_version: v1
driver.version: 2.0.3
driver.version.internal: 0.41
input.frequency: 005.9
input.voltage: 118.0
ups.firmware.aux: 12.03.0024
ups.load: 034.0
ups.mfr: Tripp Lite
ups.model: SU2200XL
ups.status: OL

The battery.voltage and input.frequency values appear to be off by a factor of 10.
Did you do anything special to your install?

Thanks,
Kirk Bocek

Gregory Gulik wrote:
> I have a very similar UPS with the SNMP module and it works fine.  Here
> are all the fields I get with upsc:
> 
> battery.charge: 100.0
> battery.voltage: 040.8
> driver.name: snmp-ups
> driver.parameter.port: tripplite1
> driver.version: 2.0.0
> driver.version.internal: 0.40
> input.frequency: 059.9
> input.voltage: 115.0
> ups.firmware.aux: Tripp Lite 3.0.37 (GAPI 2.0)
> ups.load: 020.0
> ups.mfr: Tripp Lite
> ups.model: SMART1500RMXL2Ua
> ups.status: OL
> 
> 
> Kirk Bocek wrote:
>> Well, bummer. I was hoping to get this to work. Thanks for your help
>> though.
>>
>> I guess I'm going to have to spring for an SNMP module for this UPS.
>> Do you know if
>> Tripplite has done anything wonky in their implementation that would
>> cause a problem
>> with nut's SNMP interface?
>>   
>