[Nut-upsuser] Tripplite SU2200XL

[Gregory Gulik]

I don't recall needing to do anything special.
If it matters I'm running the NUT that comes with RHEL4 which is 2.0.0

Kirk Bocek wrote:
> Gregory,
> I installed an SNMP web card in my Tripplite ups and here's what I get:
>
> $upsc tripplite1-snmp at localhost
> battery.charge: 100.0
> battery.voltage: 008.1
> driver.name: snmp-ups
> driver.parameter.mibs: ietf
> driver.parameter.pollfreq: 15
> driver.parameter.port: tripplite1.pvt
> driver.parameter.snmp_version: v1
> driver.version: 2.0.3
> driver.version.internal: 0.41
> input.frequency: 005.9
> input.voltage: 118.0
> ups.firmware.aux: 12.03.0024
> ups.load: 034.0
> ups.mfr: Tripp Lite
> ups.model: SU2200XL
> ups.status: OL
>
> The battery.voltage and input.frequency values appear to be off by a factor of 10.
> Did you do anything special to your install?
>
> Thanks,
> Kirk Bocek
>
> Gregory Gulik wrote:
>   
>> I have a very similar UPS with the SNMP module and it works fine.  Here
>> are all the fields I get with upsc:
>>
>> battery.charge: 100.0
>> battery.voltage: 040.8
>> driver.name: snmp-ups
>> driver.parameter.port: tripplite1
>> driver.version: 2.0.0
>> driver.version.internal: 0.40
>> input.frequency: 059.9
>> input.voltage: 115.0
>> ups.firmware.aux: Tripp Lite 3.0.37 (GAPI 2.0)
>> ups.load: 020.0
>> ups.mfr: Tripp Lite
>> ups.model: SMART1500RMXL2Ua
>> ups.status: OL
>>
>>
>> Kirk Bocek wrote:
>>     
>>> Well, bummer. I was hoping to get this to work. Thanks for your help
>>> though.
>>>
>>> I guess I'm going to have to spring for an SNMP module for this UPS.
>>> Do you know if
>>> Tripplite has done anything wonky in their implementation that would
>>> cause a problem
>>> with nut's SNMP interface?
>>>   
>>>       

-- 
Greg Gulik                                 http://www.gulik.org/greg/
greg @ gulik.org


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20060531/72f3b21f/attachment.html