[Nut-upsuser] MGE Ellipse Premium 1200 USB cable only works if plugged after boot

[Kjell Claesson]

Hi Pedro,

tor 2006-11-02 klockan 12:48 +0000 skrev Pedro Côrte-Real:
> I have an MGE Ellipse Premium 1200 that I connected to my server using
> its USB cable. Nut seems to be working fine. I've done a power down
> test and it worked and came back up when the UPS had power again. I'm
> using the newhidups driver and the USB cable.
> 
> The problem I'm having is that if I boot with the cable connected
> newhidups says it can't find the UPS. If I unplug and plug in the
> cable again it finds it and works fine. What debug information should
> I collect for this?
> 

It depends on what dist of Linux you are running. The new type
use udev and hal and the old use coldplug.

So little more info about your system please.

Regards
Kjell