[Nut-upsuser] MGE Ellipse Premium 1200 USB cable only works if plugged after boot

Kjell Claesson kjell.claesson at epost.tidanet.se
Thu Nov 2 18:46:02 CET 2006

tor 2006-11-02 klockan 14:59 +0000 skrev Pedro Côrte-Real:
> On 11/2/06, Kjell Claesson <kjell.claesson at epost.tidanet.se> wrote:
> > Hi Pedro,
> Hi
> > It depends on what dist of Linux you are running. The new type
> > use udev and hal and the old use coldplug.
> >
> > So little more info about your system please.
> I'm using Ubuntu edgy. That uses udev but since it's a server install
> it doesn't use hal and dbus. Nut is 2.0.4-2, the kernel is 2.6.17-10
> and udev is 093-0ubuntu18.
> I did a lsusb -v before and after repluggin the cable and the only
> difference seems to be the device being given a new device number,
> from 3 to 4. Any ideas on what might be happening?

If you restart the upsdrv before you replug the ups, does it find the
ups ?

The thing is that you may start the nut to early. In what runlevel do 
you start nut ?

Don't know if ubuntu have runlevel dependency in ther script's.
I run Gentoo.


More information about the Nut-upsuser mailing list