[Nut-upsuser] Sweex 1000VA UPS

[Sergiy Kazakov]

To prevent system shutdown on LB while testing you may set
<powervalue> value in MONITOR line (in upsmon.conf) to "0" (zero). But
don't forget to set MINSUPPLIES to zero too. See comments in
"upsmon.conf" and "man upsmon.conf" for further details. Whith this
one you can check if the other parts of nut getting read on LB. Also
you can setup non-critical workstation as slave (even MS Windows
workstation) and check whether upsmon sends shutdown instruction.

-- 
Best regards,
 Sergiy                            mailto:rendol at mail.zp.ua