[Nut-upsuser] Tripp Lite OMNI900LCD

[Marc Collin]

Le vendredi 8 septembre 2006 15:35, Peter Selinger a écrit :
> Charles Lepple wrote:
> > On 9/8/06, Hans Fugal <fugalh at gmail.com> wrote:
> > > I have a Tripp Lite OMNI900LCD.
> > > ...
> > > I can't get newhidups to recognize it at all.
> >
> > Support for newer Tripp-Lite USB/HID models is still in the
> > development tree (the trunk in SVN). Instructions for grabbing it via
> > SVN are here:
> >
> > http://www.networkupstools.org/source.html
> >
> > This will hopefully make it into the 2.0.5 release, but I imagine
> > there is a bit of backporting to do.
>
> yes, indeed, I added support for a Tripp Lite ONMI1000LCD to the
> development tree a while ago; I assume this is similar enough to your
> Tripp Lite OMNI900LCD so that it should also work. The driver is
> newhidups. -- Peter

when i contacted tripp lite, they said me omni900lcd use the same hid table 
then ripp Lite  OMNIVS or ripp Lite  SmartUPS don't remember