[Nut-upsuser] Tripp Lite OMNI900LCD

[Peter Selinger]

OK, in any case, once Hans gets the development version of NUT, he can
then produce enough debugging output so that we can hopefully support
the model. -- Peter

Marc Collin wrote:
> 
> Le vendredi 8 septembre 2006 15:35, Peter Selinger a =E9crit=A0:
> > Charles Lepple wrote:
> > > On 9/8/06, Hans Fugal <fugalh at gmail.com> wrote:
> > > > I have a Tripp Lite OMNI900LCD.
> > > > ...
> > > > I can't get newhidups to recognize it at all.
> > >
> > > Support for newer Tripp-Lite USB/HID models is still in the
> > > development tree (the trunk in SVN). Instructions for grabbing it via
> > > SVN are here:
> > >
> > > http://www.networkupstools.org/source.html
> > >
> > > This will hopefully make it into the 2.0.5 release, but I imagine
> > > there is a bit of backporting to do.
> >
> > yes, indeed, I added support for a Tripp Lite ONMI1000LCD to the
> > development tree a while ago; I assume this is similar enough to your
> > Tripp Lite OMNI900LCD so that it should also work. The driver is
> > newhidups. -- Peter
> 
> when i contacted tripp lite, they said me omni900lcd use the same hid table=
> =20
> then ripp Lite  OMNIVS or ripp Lite  SmartUPS don't remember
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>