[Nut-upsuser] Tripp Lite OMNI900LCD

[Hans Fugal]

Oops, was supposed to send that to the list.

---------- Forwarded message ----------
From: Hans Fugal <fugalh at gmail.com>
Date: Sep 8, 2006 8:05 PM
Subject: Re: [Nut-upsuser] Tripp Lite OMNI900LCD


Thanks, SVN newhidups driver seems to be working fine.  Here's the
upsc output. I had to specify the productid in the config file in
order for the -a flag to work, that's probably undesirable.

battery.charge: 100
battery.type: PbAc
battery.voltage: 0.0
battery.voltage.nominal: 12.0
driver.name: newhidups
driver.parameter.port: /dev/usb/hiddev0
driver.parameter.productid: 2005
driver.version: 2.1.0
driver.version.data: TrippLite HID 0.1 (experimental)
driver.version.internal: 0.30
input.frequency: 59.9
input.voltage: 119.0
input.voltage.nominal: 120
output.frequency.nominal: 60
output.voltage: 166.0
output.voltage.nominal: 120
ups.beeper.status: enabled
ups.delay.reboot: 65535
ups.delay.shutdown: 65535
ups.mfr: Tripp Lite
ups.model: TRIPP LITE UPS
ups.power.nominal: 900
ups.serial: 692195 B
ups.status: OL CHRG
ups.test.result: Done and passed

Two generic items to report. First, configure (or whatever) isn't
processing the files  scripts/hotplug-ng/*.in . Second, on recent 2.6
kernels you don't need the hotplug file at all, just the udev rules
file. udev has completely superceded hotplug.

On 9/8/06, Peter Selinger <selinger at mathstat.dal.ca> wrote:
> OK, in any case, once Hans gets the development version of NUT, he can
> then produce enough debugging output so that we can hopefully support
> the model. -- Peter
>
> Marc Collin wrote:
> >
> > Le vendredi 8 septembre 2006 15:35, Peter Selinger a =E9crit=A0:
> > > Charles Lepple wrote:
> > > > On 9/8/06, Hans Fugal <fugalh at gmail.com> wrote:
> > > > > I have a Tripp Lite OMNI900LCD.
> > > > > ...
> > > > > I can't get newhidups to recognize it at all.
> > > >
> > > > Support for newer Tripp-Lite USB/HID models is still in the
> > > > development tree (the trunk in SVN). Instructions for grabbing it via
> > > > SVN are here:
> > > >
> > > > http://www.networkupstools.org/source.html
> > > >
> > > > This will hopefully make it into the 2.0.5 release, but I imagine
> > > > there is a bit of backporting to do.
> > >
> > > yes, indeed, I added support for a Tripp Lite ONMI1000LCD to the
> > > development tree a while ago; I assume this is similar enough to your
> > > Tripp Lite OMNI900LCD so that it should also work. The driver is
> > > newhidups. -- Peter
> >
> > when i contacted tripp lite, they said me omni900lcd use the same hid table=
> > =20
> > then ripp Lite  OMNIVS or ripp Lite  SmartUPS don't remember
> >
> > _______________________________________________
> > Nut-upsuser mailing list
> > Nut-upsuser at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
> >
>
>


--
Hans Fugal
Fugal Computing


-- 
Hans Fugal
Fugal Computing