[Nut-upsuser] tripp lite SMART2200RMXL2U -- empty ups.status

[Jeff Knerr]

 Hello. I'm new to nut and don't know if I've missed something in
 setting it up or if my ups isn't quite supported. I'm using these:

    - svn version of nut (downloaded on 9/13/06)
    - a tripp lite SMART2200RMXL2U
    - debian sarge with 2.6.8 kernel 
    - the tripplite_usb driver (newhidups says my ups is not supported)

 I figured out how to get the device perms correct. A sample run is
 included below. Any ideas why the ups.status line is empty? 

jeff

$ sudo /usr/local/bin/upsdrvctl -DDDDD start
Password:
Network UPS Tools - UPS driver controller 2.1.0
Starting UPS: tripplite
exec: /usr/local/stow/nut-2.1-dev/bin/tripplite_usb -a tripplite
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.1.0)
Warning: This is an experimental driver.
Some features may not function correctly.

Detected a UPS: TRIPP LITE/TRIPP LITE SMART2200RMXL2U
Using SMARTPRO protocol (3003)
Unknown battery voltage: 0x3038
Attached to Tripp Lite SMART2200RMXL2U
Unknown value for s[2]: 0x34
$
$ sudo upsd
Network UPS Tools upsd 2.1.0
/usr/local/stow/nut-2.1-dev/etc/upsd.conf is world readable
Connected to UPS [tripplite]: tripplite
/usr/local/stow/nut-2.1-dev/etc/upsd.users is world readable
Synchronizing...done
$
$ upsc tripplite at localhost
battery.voltage: 13.50
battery.voltage.nominal: 12
driver.name: tripplite_usb
driver.parameter.port: /dev/ups
driver.parameter.productid: 0001
driver.version: 2.1.0
driver.version.internal: 0.6
input.voltage: 106
input.voltage.nominal: 120
ups.debug.D: 36 38 38 37 0d 00 00 '6887...'
ups.debug.M: 30 30 37 37 0d 00 00 '0077...'
ups.debug.S: 31 34 30 00 5a 30 0d '140.Z0.'
ups.debug.T: 38 37 32 35 37 31 0d '872571.'
ups.delay.shutdown: 64
ups.firmware: F1115.B
ups.load: 3
ups.mfr: Tripp Lite
ups.model: SMART2200RMXL2U
ups.power.nominal: 2200
ups.status:
$