[Nut-upsuser] HP R3000 XR, warning or perhaps error

[Arnaud Quette]

2007/4/17, Kjell Claesson <kjell.claesson at epost.tidanet.se>:
> ...
> > Network UPS Tools - UPS driver controller 2.0.5
> > Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5)
> >
> > Communications with UPS lost: Error executing command
> > Communications with UPS lost: Error executing command
> > Communications with UPS lost: Error executing command
> > Communications with UPS re-established
> > Connected to UPS on /dev/ttyS0 baudrate: 9600
> > Model = HP R3000 XR      3000VA
> > Firmware = Inve:01.09 Netw:03.60
> > Shutdown delay =  120 seconds
> > #
> >
> > It all seems to work but the initial errors or warnings concern me. I'm
> > running stable 2.05 built from source.
>
> This come from the baudhunting function in the driver.
> If you set the baud_rate in the ups.conf to 9600 You don't get this
> errors.
> ...

can't this be filtered to avoid user confusion?

Arnaud
-- 
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/