[Nut-upsuser] [MGE EVOLUTION 850 VA/ ups 2.0.4] Output.voltage is at 0.0

[via.lej at free.fr]

Hello !

	I've just a problem with upsd/upsmon 2.0.4, please have a look at the upsc command:


--------------------
battery.charge: 59
battery.charge.low: 5
battery.runtime: 1312
battery.voltage: 24.0
driver.name: newhidups
driver.parameter.port: auto
driver.version: 2.0.4
driver.version.data: MGE HID 0.9
driver.version.internal: 0.28
input.frequency: 0.0
input.transfer.boost.low: 184.0
input.transfer.high: 294.0
input.transfer.low: 160.0
input.transfer.trim.high: 265.0
input.voltage: 0.0
outlet.0.desc: Main Outlet
outlet.0.id: 0
outlet.0.switchable: 0
outlet.1.autoswitch.charge.low: 0
outlet.1.delay.shutdown: -1
outlet.1.delay.start: -1
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 1
outlet.1.switch: 1
outlet.1.switchable: 1
outlet.2.autoswitch.charge.low: 0
outlet.2.delay.shutdown: -1
outlet.2.delay.start: -1
outlet.2.desc: PowerShare Outlet 2
outlet.2.id: 2
outlet.2.switch: 1
outlet.2.switchable: 1
output.current: 0.40
output.frequency: 50.0
output.voltage: 0.0
output.voltage.target.battery: 24.0
output.voltage.target.line: 24.0
ups.delay.shutdown: -1
ups.delay.start: -1
ups.load: 17
ups.mfr: MGE UPS SYSTEMS
ups.model: Evolution 850
ups.power.nominal: 850
ups.serial: AV2H2505X
ups.status: OB DISCHRG
ups.test.interval: 604800
ups.test.result: Done and passed
-------------------------------

Look at the line output.voltage, the value is 0, i don't understand, what's the problem ?

Thanks !
Vianney