[Nut-upsuser] Powerware 5110

[Steve Simeonidis]

I have an FC5 system with a powerware 5110 usb ups.
 
The system seems to find the UPS
 
------------------------------
[root at b1 src]# lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0592:0002 Powerware Corp.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
-------------------------------
 
[root at b1 src]# cat /proc/bus/usb/devices
......
 
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0592 ProdID=0002 Rev= 0.50
S:  Manufacturer=Powerware
S:  Product=Powerware UPS
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=20ms
 
-----------------------------
 
I have set the port to auto but I can not make it work
 
What do I need to set the port to?
 
I have tried /sbin/bcmxcp_usb  /proc/bus/usb/003/002
 
it says it can not find the UPS device on USB Bus....
 
Thanks
Steve


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20070204/7ca1a2bb/attachment.htm