[Nut-upsuser] MGE Nova AVR 600 USB on FreeBSD

[Arnaud Quette]

Hi Daniel

2007/2/19, Daniel O'Connor <doconnor at gsoft.com.au>:
> On Friday 16 February 2007 22:51, Arnaud Quette wrote:
> > then relaunch usbhid-ups in debug and feed us back,
> > Note that this is only a temporary fix that disable interrupt handling
> > (so the driver only polls the UPS), while waiting for a proper
> > solution in freebsd / sun...
>
> I tried this on an MGE UPS using NUT 2.0.5 and FreeBSD -current. The system
> can read data from the UPS just fine. Unfortunately it doesn't appear to be
> able to set values properly :(
>
> I tried setting the power share output off but the load continued on as
> normal, ie..
> upsrw -s outlet.2.delay.shutdown=0 -u user -p password ups1 at localhost

Are you sure your unit supports outlet.2?
ie, validating with an upsc output (sorry for the question, just to be sure ;-))

if your unit supports it, can you:
- post your upsc output
- restart the driver in debug mode (using "-DDD -a"!)
and post  the part when you upsrw (starts with "entering setvar..."

Arnaud
-- 
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/