[Nut-upsuser] Success with newhidups - Dynex DX-800U

[M.A.E. Hanson]

Just wanted to report that I have successfully got a Dynex DX-800U UPS
functioning with the newhidups driver.  This UPS appears to be made by 
CyberPower Systems and I believe is the same as the CPS 800AVR.
---------
# upsc dynex at localhost
battery.charge: 66
battery.charge.low: 10
battery.charge.warning: 20
battery.runtime: 399
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 19.7
battery.voltage.nominal: 12.0
driver.name: newhidups
driver.parameter.port: auto
driver.version: 2.0.5
driver.version.data: APC/CyberPower HID 0.9
driver.version.internal: 0.30
input.transfer.high: 140
input.transfer.low: 90
input.voltage: 122.0
input.voltage.nominal: 120
output.voltage: 122.0
ups.beeper.status: enabled
ups.delay.shutdown: -1
ups.load: 50.0
ups.mfr: CPS
ups.model: DX-800U
ups.power.nominal: 636
ups.status: OL CHRG LB
ups.test.result: Done and warning
----------
# upscmd -l dynex at localhost
Instant commands supported on UPS [dynex at localhost]:

load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.stop - Stop a shutdown in progress
beeper.on - Enable the UPS beeper
beeper.off - Disable the UPS beeper
----------
Mike Hanson